Bench Builder Vise Kits

2X Bench Builders Bundle

2X Bench Builders Bundle
2X Bench Builders Bundle  - includes:
One - 2X Wood Vise Screw - Single Kit Premium - which includes:
>> One 2X hard maple wood vise screw
  • Double start thread, 1 TPI (2 Threads per inch but 1 turn per inch of movement)
  • Vise Screw is milled from a solid billet of hard maple, no glue joints
  • Total Length approx: 23" to 24"
  • Hub approx.size: 4" diameter x 4-3/4" long
  • Robust threaded section approx. size: 3" diameter x 19 long, 2" next to hub is unthreaded
>> One 2X hard maple wood nut
  • Approx.size: 2-3/4" thick x 5" wide x 8-9" long
>> One hard maple wood handle - end grain threaded knobs on both ends
  • Approx. Size 1" diameter handle x 1-3/4" diameter knobs x 16-3/4" length
  • Two hard maple end grain threaded knobs - approx size 1-3/4" x 1-7/8"
  • Two rubber O-Rings for use with wood handle and knobs
>>One external 2X brass garter set with steel screw kit
  • Your choice of either our aged "Vintage Finish" or our  "Brushed Finish" garter set
One - Wood Wagon Vise Screw - Premium Kit - which includes:
>> One hard maple wood wagon vise screw
  • Total Length approx: 16"
  • Hub approx.size: 3-1/2" diameter x 4" long
  • Threaded section approx.size: 2-1/2" diameter x 11" long
  • Allows for approximately 8" of travel for the vise capacity
  • Vise Screw is milled from a solid billet of hard maple, no glue joints to fail
 >> One hard maple Extended wood nut (Option for Standard Type Nut)
  • Extended Nut - Eliminates need to build up Wagon Vise end cap prior to installation
  • Counterbored outside face of tapped hole so the vise can screw in closer to bench top
  • Approx.size 2-3/4" thick x 4" wide x 26"-28" long
  • Standard Nut Option - Requires build up of Wagon Vise end cap prior to installation
  • Approx.size: 2-3/4" thick x 4" wide x 8-9" long
 >> One Brass Connector Plate with steel screw kit   
  • Brass Plate includes your choice of either our aged "Vintage Finish" or our "Brushed Finish"
 >> One Shoulder Bolt and Anchor
  • Also includes a slotted shim for proper Bench Anchor installation
>> One hard maple wood handle - end grain threaded knobs on both ends
  • Approx. Size 1" diameter handle x 1-3/4" diameter knobs x 16-3/4" length
  • Two hard maple end grain threaded knobs - approx size 1-3/4" x 1-7/8"
  • Two rubber O-Rings for use with wood handle and knobs
    >>Wagon vise screw installation package includes: 
    • 2 Maple Runners - Pre-slotted & counterbored for easy install
    • Runners include lag screws and washers
    • 2 UHMW (Ultra High Molecular Weight) Plastic Sliders - Pre-drilled
    • Sliders include stainless steel screw kit
    • 4 - Six inch SPAX x 1/2" Lag Bolts
    • 2 - Five inch x 1/2" Lag Bolts

    (Leadtime = Ships within 2 weeks or less)

    $ 629.00